Cleaning The Printerõs Case; Cleaning The Inside Of The Printer; Clearing A Print Media Jam - Primera Pictura 310s User Manual

IMPORTANT!
C. Cleaning the
PrinterÕs Case
D. Cleaning the
Inside of
the Printer
E. Clearing a
Print Media Jam
68
Never use a sharp tool or a metal object of any kind to
clean the printhead. You will damage the printhead!
Your Color Sign Printer has a durable casing that
should retain its luster and appearance for many
years. Clean it with a Cleaning Pad from the
Printer Cleaning Kit or a soft, lint-free cloth slightly
moistened with water or a mild soap. Do not use
excess water or cleaning solvents of any kind.
Never spray the cabinet with a cleaner. Rather,
spray the cloth first, and then wipe down the
printer.
As you use your Color Sign Printer, dust and paper
particles will accumulate inside the printerÕs case.
These particles are attracted to the underside of the
ribbon by static produced during printing and can
cause voids on the printed image. Periodically, use
the following procedure to remove dust and paper
particles.
1.
Open the printerÕs Top Cover by pressing the
Cover Release Button.
2.
Remove the Ribbon Cartridge from the printer.
3.
Remove the Media Tray Assembly and remove
its print media.
4.
If you have access to a very small vacuum
cleaner (most computer stores sell devices just for
this purpose), use it to vacuum out all visible areas
inside the printer. If you donÕt have such a device,
use a Cleaning Pad from the Printer Cleaning Kit
or a soft, lint-free cloth slightly moistened with
isopropyl alcohol to thoroughly wipe out the entire
interior of the printer. Also, wipe out the inside of
the Media Supply Tray. Be extremely careful not to
let any alcohol drip inside the printerÕs case.
5.
Re-install the Media Tray Assembly and Ribbon
Cartridge, and close the printerÕs cover.
If a sheet of print media becomes jammed inside
the printer, remove it through the following steps.
1.
Leave the power on and open the cover of the
printer by pressing the Cover Release Button.
2.
Remove the Ribbon Cartridge.
3.
Press cancel button to advance the print media.
Press the on-line button to reverse it.