Primera Pictura 310s User Manual page 51

Monochrome
3 Color Wax
4 Color Wax
3 Color Dye Sub
4 Color Dye Sub
B & W Dye Sub
Mono Resin
Process 3 Color Resin Select if using the yellow, magenta, and cyan spot
Process 4 Color Resin Select if using the yellow, magenta, cyan, and black
Paneled 3 Color Resin Select if using the 3-color resin ribbon. This ribbon
Paneled 4 Color Resin Select if using the 3-color resin ribbon with a black
CMYO Dye Sub
NOTE
46
Ribbon Type
Click on the Ribbon Type box. A list of ribbon type
options will appear. Select the option appropriate
for the ribbon type currently installed in the printer.
The following table explains each of these options.
See Section 4-B for additional ribbon information.
Select if using the monochrome black wax thermal
ribbon.
Select if using the 4-color wax thermal ribbon and wish
to print with only the first three yellow, magenta, and
cyan color panels. Skipping the black panel increases
print speed but will produce a ÒcompositeÓ black
instead of a ÒtrueÓ black.
Select if using the 4-color wax thermal ribbon.
Select if using the 4-color dye-sublimation ribbon and
wish to print with only the first three yellow, magenta,
and cyan color panels. Skipping the black panel
increases print speed but will produce a ÒcompositeÓ
black instead of a ÒtrueÓ black.
Select if using the 4-color dye-sublimation ribbon.
This ribbon type is currently not available.
Select if using a spot-color resin ribbon to print a single
or multi-spot-color sign. See Section 9-D or 9-E for
more information on this printing process.
color ribbons to print a full process color image.
Skipping the black ribbon increases print speed but
will produce a ÒcompositeÓ black instead of a ÒtrueÓ
black. See Section 9-C for more information on this
printing process.
spot color ribbons to print a full process color image.
See Section 9-C for more information on this printing
process.
prints full-color images with no ribbon changes.
spot-color resin ribbon. This provides full-color
printing with a ÒtrueÓ black, while only requiring one
ribbon change.
Select if using the 3-color FotoShield dye-sublimation
ribbon with overlay.
When printing process color signage with the resin thermal
print ribbons, the main reason for using the separate spot
process color ribbons (Y,M,C,K), as opposed to the 3-color
paneled resin ribbon, is to gain an extra 2Ó (51mm) in
printable length. This additional length is achieved only
when printing with the extended 12Ó x 26Ó (305 x 660mm)
calendered vinyl.