Choosing The Quickdraw Printer Driver - Primera Pictura 310s User Manual

C. Choosing the
QuickDraw
Printer Driver
2.
The Chooser
displays an icon for all
the printer drivers
installed in the System
Folder. Among these,
you should see the icon
for the Color Sign
Printer printer driver
you just installed. If you
do not see the icon, go
through the installation
procedure again making
sure the Install driver
and prefs option is
selected. Once you
locate the Color Sign
Printer icon, click on the
icon to select it.
44
5.
When the installer window appears, select the
options you would like the installer program to
install. In most instances, the default selections will
suffice. For a description of each of these options,
refer to the notes found in the box directly above
these options (use the up and down arrows to
scroll through the notes). Once the desired options
are selected, click on Install. The appropriate files
will automatically install onto your computer.
Insert additional install disks as prompted. An alert
box will display when installation is complete.
The Chooser is a Desk Accessory in the Apple
menu. Before you can use the Color Sign Printer,
you need to select the Color Sign Printer printer
driver using the Chooser. This instructs your
Macintosh to send print jobs to the Color Sign
Printer instead of to some other printer you may
already have connected to your system. Refer to
the following steps to select the Color Sign Printer
printer driver:
1.
Select Chooser from the Apple menu.
3.
Select either Modem or Printer Port to indicate
to which port the serial interface cable was
connected, and set AppleTalk to Inactive. (If you
have the optional high-speed Centronics parallel
interface board installed, select Hurdler II CPI as
the appropriate output port.)
4.
If you chose to install the Background Print
Utility during the installation procedure, select
either On or Off to enable or disable the Color Sign
PrinterÕs Background Printing function. When
enabled, this function allows you to work in the