Primera Pictura 310s User Manual page 24

The Supply Tray stores the blank media to be
printed. The Tray Cover rests on top of the Supply
Tray and protects print media within the Supply
Tray from dust or other contaminants. The Tray
Cover also helps guide media during the printing
process and catches finished output after it is
printed. If you intend to use a variety of print
media, you may wish to purchase additional
Media Tray Assemblies. Additional trays not only
offer an ideal place to store blank print media, they
also make the process of switching between
different print media faster and more convenient.
Refer to the following steps to load print media
into the Supply Tray:
1.
Before loading any media, depress the spring
loaded panel of the Supply Tray until it is latched
in its ÒdownÓ position. This panel will unlatch and
return to its ÒupÓ position when inserted into the
printer.
2.
Remove a stack of print media from its
packaging. Please note that no more than about
50 sheets of print media should be loaded at a
time. Do not attempt to load more than this
amount.
3.
Fan the stack of print media to assure that none
of the sheets are sticking together. Then, neatly
stack the media and check to see that it is free of
bent edges. Handle the print media only along the
edges and DO NOT TOUCH THE PRINTABLE
SIDE. Oil or dirt from your hands can impair print
quality.
19