Section 2: Printing Slides; Printing From Other Programs; Printer Driver Settings - Primera SignatureEVO User Manual

Section 2: Printing Slides

The included PTLab SE software can be used to print to the Signature EVO Slide Printer. The PTLab software has
its own manual. Please refer to it for detailed capabilities.
2A. Printing from other Programs
Printing to the Slide Printer from other software (besides PTLab SE) can be accomplished by using the
standard Windows driver. The document requirements are listed below:
•
Default Page = .87" (22mm) W x .67" (17mm) H
•
Colors = Cyan, Magenta, Yellow, Red, Blue/Purple, Green, Black
•
All colors must be 100% saturated
To print, simply go the applications print function. Choose the "Slide Printer" as the printer. Click OK to print.
2B. Printer Driver Settings
Click the Start button, search for "Printers". Select Printers and Scanners. Select Slide Printer. Choose Manage.
Select Printing preferences.
Paper Size: Default paper size is set to the maximum. Edit these settings if you are printing to slides with a
smaller printable area.
Orientation: Change the orientation to Portrait or Landscape.
Rotate 180 Degrees: Flips the image up-side down . Default setting is Yes.
Printer Information... Click here to display, printer driver versions, firmware versions, total prints, current
status, remaining slides, remaining prints and offset values.
Page | 17