Placing The Ribbon Cartridge Into The Printer - Primera Pictura 310s User Manual

IMPORTANT!
D. Placing the
Ribbon Cartridge
into the Printer
2.
With the cover open,
place the loaded Ribbon
Cartridge into the printer.
Be certain that the supply
end of the Ribbon
Cartridge is towards the
rear of the printer.
3.
Close the cover. When
you start to print, the
notches on the Ribbon
Drive Hub and the take-
up roll will automatically
engage.
3.
Place the supply end of the ribbon into the
supply end of the Ribbon Cartridge as indicated.
Make certain that the ribbon is fed from
underneath the supply end of the ribbon roll,
up and over the top of the take-up end of the
ribbon roll.
Take-up End
DO NOT REVERSE THE RIBBON. DAMAGE MAY
OCCUR TO THE THERMAL PRINTHEAD!
Once the ribbon is installed into the Ribbon
Cartridge, it can then be placed into the printer.
1.
Press the Cover Release Button. Allow the
cover to swing up and open.
Supply End
15