Inserting The Media Tray Assembly Into The Printer - Primera Pictura 310s User Manual

NOTE
H. Inserting the
Media Tray
Assembly into
the Printer
20
4.
Place the print media Ñ PRINT SIDE FACING
DOWN Ñ between the media guides of the Supply
Tray. When inserted properly, the backing side of
the print media will be facing up. Adjust the media
guides snugly against the media stack. This will
assure consistent feeding and printing.
Do not attempt to load print media on which you have
already printed or which is not factory approved.
Printing onto such media may damage the printer.
Once print media is loaded into the Supply Tray,
the Media Tray Assembly can then be inserted into
the printer. Although the separate parts of the
Media Tray Assembly can be loaded into the
printer one at a time, it is easiest to load the Media
Tray when it is fully assembled. Refer to the
following steps to assemble and insert the Media
Tray Assembly into the printer.
1.
Place the assemblyÕs Tray Cover onto the
Supply Tray so the extensions on the front edges of
the Tray Cover engage the securing notches on
both sides of the Supply Tray.