Primera Pictura 310s User Manual page 54

Making the dots four or five times larger, however,
can make the bitmaps look ragged. The Better
bitmap scaling option works by enlarging the size
of the print enough for all 72-dpi bitmaps to be
printed with an integer dot increase. If this option
is selected, however, the image printed will be
reduced in size by 4%.
Enhance Fine Text
This option only applies when printing with a dye-
sublimation ribbon type. When selected, this
option allows the Color Sign Printer to apply a
software-based spatial filter. This filter brings out
the fine detail of smaller text and lines and allows
them to print with much greater definition and
clarity. Image processing time will increase when
using this option.
Text anti-aliasing
This option is only available when printing with
the dye-sublimation ribbon type. When selected,
this option will improve the quality of printed text
when using scalable fonts (System 7 TrueType or
Postscript Type 1 fonts with Adobe Type Manager).
Image processing time will increase when using
this option.
Color bitmap smoothing
This option is only available when printing with
the dye-sublimation ribbon type. When selected,
this option will improve the appearance of lower
resolution images (less than 100 DPI). Image
processing time will be increased when using this
option.
Black text on black pass only
This option only applies when printing with a
4-color ribbon (C,M,Y,K). Select this option if you
wish to print all gray scale TrueType text with the
ribbonÕs black panel only. Normally, when printing
gray scale or black text, the Color Sign Printer lays
down all four of the ribbonÕs color panels. By
laying down only the black panel, the Color Sign
Printer is able to print black text with greater
sharpness and definition. Processing time may
increase when this option is selected. Please note
that some applications may not support this
option.
Overlay
This option only applies when printing with the
3-color FotoShield dye-sublimation ribbon
(C,M,Y,O). Deselect this option if you wish to print
dye-sublimation output without applying the
49