Cleaning The Printhead - Primera Pictura 310s User Manual

B. Cleaning
the Printhead
Use the following illustration to locate the items
discussed in this section:
Ribbon Guard
Printhead
Printhead
Cover
Media Tray Cover
Media Supply Tray
This procedure is performed if you notice a streak
running the length of the page where color was not
transferred.
1.
Open the printerÕs Top Cover by pressing the
Cover Release Button.
2.
Remove the Ribbon Cartridge from the printer.
3.
Use a Printhead Cleaning Pen from the Printer
Cleaning Kit or a soft, lint-free cloth slightly
moistened with isopropyl alcohol to wipe dust and
other accumulated particles off the surface of the
printhead. If using a cloth, be extremely careful
not to use too much alcohol. It must not be allowed
to drip into the printer!
4.
Allow the printhead to thoroughly dry before
re-installing the Ribbon Cartridge.
5.
Re-install the Ribbon Cartridge, and shut the
cover. If a streak persists, Contact Technical
Support for further assistance (see Section 11 for
Technical Support information).
Printhead
Drive Roller
67