Setting Up The Quickdraw Printer Driver - Primera Pictura 310s User Manual

D. Setting Up
the QuickDraw
Printer Driver
NOTE
foreground of your application while printing in
the background. Refer to Section 8 for more
information on background printing. If you chose
not to install the Backgrounder, the ChooserÕs
Background Printing option will be inactive and
grayed out.
5.
Once your selections have been made, click on
the box in the upper left-hand corner of the
Chooser to close it.
The next time you open the Chooser, the selected
driver will no longer be highlighted. The Chooser
remembers which driver is the current one but
does not display it when opened.
Once the printer driver has been successfully
installed and selected within the Chooser, you will
need to set the driver up with the appropriate print
options for your specific print job. To change or
verify your printer driver options, select Page
Setup from the File menu, and configure the driver
according to the following:
Most applications allow you to change these same
printer driver options from their own Page Setup
screens. This means that you donÕt have to go back to the
main printer setup window each time you want to
change a setting or option in the printer driver. These
applications will usually give you the same choices and
options, but in a slightly altered format.
Paper Size
Click on the Paper Size box. A list of paper size
selections will appear. Select the paper size option
that matches the print media size currently
installed in the printer. See Section 4-E and 4-I for
additional paper size information.
45