Removing The Ribbon Cartridge - Primera Pictura 310s User Manual

Color sign printer
Table of Contents

Advertisement

NOTE
E. Removing the
Ribbon Cartridge
10
This illustration shows the switches and input
ports found on the rear panel of the printer. For
more information on these port, please refer to
Sections 6, 7, or Appendix A.
Parallel
Interface
Serial
Interface
Off
On
Leave the small switches on the rear panel of the printer
in the default position unless otherwise instructed by
this manual or a factory technician. The default position
of these switches is for switch #1 and #2 to be DOWN
and for the rest of the switches to be UP.
The Ribbon Cartridge is what holds a print ribbon
in place inside the printer. A single Ribbon
Cartridge is included with your Color Sign Printer.
During shipment, this cartridge is fastened to the
inside of the unit. To remove the Ribbon Cartridge
from the inside of the printer, refer to the following
steps:
Power
Switch
Power Input Port

Advertisement

Table of Contents
loading

This manual is also suitable for:

510201

Table of Contents