Loading Ribbon Into The Ribbon Cartridge - Primera Pictura 310s User Manual

C. Loading Ribbon
into the Ribbon
Cartridge
14
positive film for screens. This ribbon produces 200
prints and provides a maximum printable area of
11.95Ó x 17.4Ó (304 x 442mm).
For added convenience, the Color Sign Printer also
accepts smaller A/A4 Super-size 4-color wax
thermal and dye-sublimation ribbons. These
ribbons produce 50 prints and are perfect for
printing smaller format images in sizes up to
8.8Ó x 11.3Ó (224 x 287mm). Use these ribbons only
with the Color Sign PrinterÕs A/A4 Super-size
(9Ó x 14Ó/229 x 356mm) wax thermal or dye-
sublimation papers. Note that A/A4 Super-size
print supplies are not available for resin thermal
printing. For current selection and availability on
all of the Color Sign Printer ribbons, please contact
your nearest reseller or the printer manufacturerÕs
supplies department.
Whether using the Ribbon Cartridge supplied with
your printer or using other cartridges purchased
separately, all Color Sign Printer Ribbon Cartridges
can be used with any of the different print ribbons.
As you purchase additional print ribbons, you may
also wish to purchase additional Ribbon Cartridges
for each. This makes the process of switching
ribbons much faster and much more convenient.
Follow these steps to load a print ribbon into a
Ribbon Cartridge:
1.
Remove the ribbon from its packaging. Do not
touch the colored portion of the ribbon. Oil or dirt
from your hands can impair print quality. Handle
the ribbon only by the ends of its ribbon cores.
2.
The supply end of the ribbon is the end with
the fresh, unused ribbon on it. The take-up end of
the ribbon is the other end.
Take-up
Supply