Installing The 32-Bit Print Spooler For Windows 95 - Primera Pictura 310s User Manual

C. Installing the
32-Bit Print
Spooler for
Windows 95
1.
Insert the 32-Bit
Print Spooler diskette
into your computerÕs
disk drive.
2.
Click the Start
button, point to
Settings, and select
Control Panel.
3.
Double-click on the
Add/Remove Programs
icon.
NOTE
30
The Color Sign Printer ships with a print utility
program called the 32-Bit Print Spooler. This print
spooler is for use only with Windows 95. Once
installed, the print spooler is able to process your
print jobs and send them to the printer at
consistently faster speeds than if sending print jobs
through the system spooler of Windows 95. In
order for the 32-Bit Print Spooler to function
properly, however, you must be sure your
computerÕs parallel port is configured according
to the instructions in Part D of this section.
The 32-Bit Print Spooler installs just like any other
standard Windows 95 application program. To
install the 32-Bit Print Spooler, refer to the
following:
4.
Follow the on-screen instructions to complete
installation. Once installed, the 32-Bit Print Spooler
icon, shown below, will appear in the Programs
group of the Start menu.
Before installing updated 32-Bit Print Spooler versions,
always uninstall the existing print spooler version from
your system. To do this, simply select 32-Bit Print
Spooler from the list of programs in the Add/Remove
Programs Properties window and click on the
Add/Remove button.