Setting Up The Windows Gdi Printer Driver - Primera Pictura 310s User Manual

E. Setting Up the
Windows GDI
Printer Driver
NOTE
Explorer, select the Ò3
double-click on the file called PRNT5UPD.EXE.
The updated parallel port driver will automatically
install. Once it is installed, restart your computer
and try your print job again.
If you are unable to set your computer as described
in this setup procedure or if you have problems
printing through the 32-Bit Print Spooler, refer to
the troubleshooting tip, ÒIÕm having problems
printing from Windows 95Ó on page 73 for
additional information.
Before you can print to your Color Sign Printer,
you will need to set the printer driver up with the
appropriate print options for your specific print
job. Refer to the following steps to change or verify
your printer driver options.
1.
If using Windows 3.1x, go back to the Control
Panel and the Printers group using steps 1 and 2
on page 29. If using Windows 95, Click the Start
button, point to Settings, and select Printers. Then,
click on the Color Sign Printer icon with the right
mouse button and select Properties. The Properties
window will appear.
2.
In Windows 3.1x, select the Setup button. In
Windows 95, click on the Details tab of the
Properties window and select the Setup button.
Most applications allow you to change these same
printer driver options from their ÒPrintÓ and/or
ÒPrinter SetupÓ screens. This means that you donÕt
have to go back to the main printer setup window each
time you want to change a setting or option in the
printer driver. These applications will usually give you
the same choices and options, but in a slightly altered
format.
1
/ FloppyÓ drive, and
2
35