Setting Up The Printer Driver - Primera Inscripta User Manual

TOC
If you do not wish to save the last print job for reprint, deselect
this option. To print a saved job, select the Print button from
the spooler's Current Job tab.
HINT: If you want to send the last job without having to
rasterize it again, open the 32-bit Spooler and click print.
The Direct to Port Mode option is selected by default. In most
instances, this option allows the spooler to send data to the
printer at its optimum speed. If, however, you experience
problems when printing with this option selected, deselect it
and try your print job again.
The Job Queue tab appears only when a print job is being sent
to the printer. This tab tells you the name and status of each job
in the queue and shows you the order in which the jobs will
print if you have sent multiple jobs to the printer. A control
button is also provided which allows you to delete every job
listed in the queue. To delete the job currently being printed,
select the Cancel Print button under the Current Job tab.
D. SETTING UP THE PRINTER DRIVER
Once the
will need to set the driver up with the appropriate print
options. Refer to the following steps to change or verify your
printer driver options:
1. Click the Start button, point to Settings, and select
Printers. Then, click on the Optical Disc Printer icon with
the right mouse button and select Properties if using
Windows 95/98/Me or Printing Preferences if using
Windows 2000/XP .
printer driver has been successfully installed, you
Using the Optical Disc Printer with Windows 17
INDEX