Installing The 32-Bit Spooler For Windows 95/98/Me - Primera Inscripta User Manual

TOC
6. For Windows 95/98/Me, open the Win98-Me folder and
select the file named CD_XFER.INF. Follow the on-screen
instructions to complete installation. Once installed, the
"Optical Disc Printer" icon will appear in the Windows
Printer's folder.
For Windows 2000/XP , open the Win2000/XP Driver folder
and select the file named OEMSETUP .INF. Make certain
for Windows 2000 installations that you de-select the
checkbox "Automatically detect and install my Plug and
Play Printer."
IMPORTANT! Once the printer driver software is installed, the Image
NOTE: Before installing updated printer driver versions, always delete the
existing printer driver version from your system. To do this, simply
select the printer driver icon from within the Printers folder, and
press the Delete key.
C. INSTALLING THE 32-BIT PRINT SPOOLER FOR
WINDOWS 95/98/ME
Your Optical Disc Printer ships with a print utility program
called the
with Windows 95 or Windows 98. Once installed, the print
spooler is able to process your print jobs and send them to the
printer at consistently faster speeds than if sending print jobs
through the Windows system print spooler. This is especially
true if printing from a somewhat slower computer. As a result,
it is highly recommended that you use the 32-Bit Print Spooler
when printing from Windows 95 or Windows 98.
The 32-Bit Print Spooler is located on the included Printer
Software CD and installs just like any other standard Windows
application program. To install the 32-Bit Print Spooler, refer to
the following:
1. Insert the included CD into your computer's CD-ROM
drive.
2. Close down all other software applications.
14 Using the Optical Disc Printer with Windows
Placement values labeled on your printer's rear panel must
be entered into the printer driver's
page 22). These values have been optimized specifically for
your printer and allow images to be centered on a CD when
printed.
32-Bit Print Spooler. This print spooler is for use only
INDEX
Calibrate window (see