Table of Contents
Advertisement
12 SERVICE WORK ON THE CHASSIS
12.10
64
Installing the lower triple clamp
W00319-11
W00549-10
W00353-11
W00297-13
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
1
Push on protective ring
(All EXC models)
–
Make sure the steering lock in area
rectly.
The catch on the steering lock engages in the notch on
the triple clamp.
–
Position the upper triple clamp and handlebar.
–
2
Mount screw
, but do not tighten it yet.
–
Position the fork legs.
3
Bleeder screws
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
The pressure and rebound damping is located in the
left and right fork leg.
p. 161)
.
A
is positioned cor-
Advertisement
Table of Contents
