(Exc-F Six Days Us); Installing The Lower Triple Clamp (Exc-F Us) - KTM 500 EXC-F 2023 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.10
12.11
66
Removing the lower triple clamp
V01787-10
V01788-10
Installing the lower triple clamp
B01605-10

(EXC-F SIX DAYS US)

Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
1
Remove screw .
–
2
Remove screw .
–
Take off the upper triple clamp with the handlebar and hang
them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
3
Remove O-ring and protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
(EXC-F US)
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
p. 119)
p. 61)
( p. 107)
p. 63)
p. 72)
4
.
p. 158)
1
is correctly posi-
3
and O-ring .