Checking The Choke Slide (50 Sx); Checking The Choke Slide (50 Sx Junior, 50 Sx Mini); Checking The Throttle Slide (50 Sx); Checking The Throttle Slide (50 Sx Junior, 50 Sx Mini) - KTM 50 SX Repair Manual
Hide thumbs
Also See for 50 SX:
- Owner's manual (91 pages) ,
- Setup instructions (19 pages) ,
- Owner's handbook manual (26 pages)
Table of Contents
Advertisement
31/CARBURETOR
Checking the choke slide (50 SX)
18.12
Checking the choke slide (50 SX Junior, 50 SX Mini)
18.13
Checking the throttle slide (50 SX)
18.14
Checking the throttle slide (50 SX Junior, 50 SX Mini)
18.15
Condition
The choke slide has been removed.
–
Check the choke slide for smooth operation.
»
If the choke slide is difficult to move or is dirty:
–
Clean the choke slide and check its activation.
Carburetor cleaner (
–
Check the piston of the choke slide for damage and wear.
»
If the piston of the choke slide is damaged or worn:
–
Change the choke slide.
–
Check the rubber sleeve and lock.
300912-10
»
If the rubber sleeve is damaged or brittle, or if the lock is not functioning:
–
Change the choke slide.
Condition
The choke slide has been removed.
–
Check the choke slide for smooth operation.
»
If the choke slide is difficult to move or is dirty:
–
Clean the choke slide and check its activation.
Carburetor cleaner (
–
Check the piston of the choke slide for damage and wear.
»
If the piston of the choke slide is damaged or worn:
–
Change the choke slide.
–
Check the rubber sleeve and lock.
300922-10
»
If the rubber sleeve is damaged or brittle, or if the lock is not functioning:
–
Change the choke slide.
Condition
The throttle slide has been removed.
–
Check the throttle slide for damage and wear.
»
If the throttle slide is damaged or worn:
–
Change the throttle slide.
–
Check the coating of the throttle slide for damage and wear.
»
If the coating is broken or worn:
–
Change the throttle slide.
300914-10
Condition
The throttle slide has been removed.
–
Check the throttle slide for damage and wear.
»
If the throttle slide is damaged or worn:
–
Change the throttle slide.
–
Check the coating of the throttle slide for damage and wear.
»
If the coating is broken or worn:
–
Change the throttle slide.
300925-10
p. 144)
p. 144)
107
Advertisement
Table of Contents
