Smoke Number/Hct; Pressure - TESTO 320 Instruction Manual

info@Testo-Direct.com
6 Using the product
[Options] → Save: the measured values are saved in a record.
>
6.2.8.

Smoke number/HCT

Calling up the function:
[ ] Measurement options
> →
number/HCT→ [OK].
The parameters
available for oil fuels.
Determine smoke tester no./smoke nos./oil depos. with the
smoke pump and enter manually:
1. Select parameter → [Edit].
2. Enter data or values → [OK].
Determine smoke tester no./smoke nos./oil depos. with the
smoke tester testo 308 and transmit wirelessly:
- The testo 308 must be in data transfer mode (
> [Options] → t308.
- The values recorded by the smoke tester are transferred to the
testo 320.
Entering the heat carrier temperature:
>
Heat carrier.
Options:
> [Options] → Clipboard: data is saved to the clipboard.
> [Options] →
is deleted.
> [Options] → Save: the measured values are saved in a record.
[Options]
> →
6.2.9.

Pressure

✓ The gas pressure set (0554 1203) must be connected.
Call up function:
[ ] Measurement options
> →
52
www.
[OK]
→ →
Smoke No. and Oil depos.
→ [Edit] → enter value → [OK].
Delete clipboard: any data saved to the clipboard
Reset values: The entered values are deleted.
[OK]
→ →
Testo-Direct
Smoke
are only
lights up).
Pressure → [OK].
1.888.610.7664
.com