Smoke No. / Hct - TESTO 330 Instruction Manual

6 Using the product
6.2.6.

Smoke No. / HCT

Calling up the function:
[
>
[OK].
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke pump and entering manually:
1. Select parameter → [Edit].
2. Enter data or values →
Determining smoke tester no. / smoke nos. / oil derivative with
the smoke tester testo 308 and transferring wireless:
[Options]
>
- The data recorded by the smoke tester are transferred to the
testo 330.
Entering the heat carrier temperature:
> Heat carrier
Options:
> [Options]
> [Options]
is deleted.
> [Options]
> [Options]
62
] Measurements
→
The parameters
available for oil fuels.
→ t308.
→ [Edit]
→ Clipboard: Data are saved to the clipboard:
→ Delete clipboard: Any data saved to the clipboard
→ Save: The meas. views are saved in a protocol.
→ Reset values: The entered data are deleted.
[OK] Smokenumber / HCT
→ →
Smoke No. and Oil derivatives
[Next] or [OK].
→ Enter value → [OK].
→
are only