Printing / Saving Data; Remembering Data (Clipboard); Confirming An Error Message - TESTO 330 Instruction Manual

5.2.7.

Printing / saving data

Assignment of the right function key with the function
Print, see Assigning the right function key page 45 .
Only meas. views, which have a display field in the measurement
view assigned, will be saved / printed out.
To be able to transmit data via infrared or Bluetooth interface to a
protocol printer, the printer to be used must have been enabled,
see Enabling the printer:, page 49.
5.2.8.

Remembering data (clipboard)

With the help of the clipboard measuring results from various
measurement types can be combined to a common protocol, which
can then be printed out (see above) Data are saved to the
clipboard via the menu
If there are data in the clipboard and the command
triggered, all data in the clipboard will be printed out
Only one set of measuring data can be recorded per measurement
type (e.g.
measurement type overwrites the previously saved data. When
changing the measurement place or the fuel, the clipboard is
deleted.
5.2.9.

Confirming an error message

If a failure occurs, an error message is shown in the display.
> Confirming an error message: [OK].
Not yet rectified error messages can be displayed in the menu
Error
The measurement data can be printed out parallel to the
saving process, while a measurement program is running.
Graph charts can be printed out using the Bluetooth® /
IRDA printer 0554 0620.
Options
Flue Gas or Draft). Repetitive saving of test data of one
> [Options] →
clipboard is deleted.
Diagnosis, see Instrument diagnosis, page 43.
and the command Clipboard.
Delete clipboard: Any data saved to the
5 First steps
Save
or
Print
is
39