Printing/Saving Data - TESTO 320 Instruction Manual

3. Set value: [▲], [▼], [◄],
function).
4. Confirm the entry:
5. Repeat steps 1 and 4 as required.
6. Save the entry: [Finished].
Input editor
1. Select the value (character) to be changed:
2. Apply value: [OK].
Options:
> Toggle between upper/lower case:
> Position the cursor in the text:
> Delete character before or after the cursor:
3. Repeat steps 1 and 2 as required.
4. Save the entry: Select
5.2.6.

Printing/saving data

Data is printed out via the key
menu. The
is available in many different menus.
To assign the right function key with the
Assigning the right function key, page 33,
Only measured values that have a display field assigned in the
measurement view are saved/printed out.
To be able to transfer data to a record printer via infrared or
Bluetooth interface, the printer used must be enabled, see Printer,
page 37.
[OK].
Ι← ABC→&$/
select
Ι← ABC→&$/
select
← next →
select
Options menu is accessed via the left function key and
The measurement data can be printed out parallel to the
saving process, while a measurement program is running.
[►] (depending on the selected
→Ι: [▲],
[▼]
→Ι: [▲],
[▼]
→
[▲], [▼] [←]
← next →
[▲],
[ ]. Data is saved via the
Save
5 First steps
[▲], [▼], [◄], [►].
→ [ABC→&$/].
→
[Ι←] or [→Ι].
or [→].
→ [Next].
[▼]
Options
function or see
27