Printing/Saving Data; Saving Data To The Clipboard (Temporary Memory); Confirming An Error Message - TESTO 320 Instruction Manual

info@Testo-Direct.com
Options:
> Toggle between upper/lower case:
select Ι← ABC→&$/
> Position the cursor in the text:
select Ι← ABC→&$/
> Delete character before or after the cursor:
select ← next →
3. Repeat steps 1 and 2 as required.
4. Save the entry: Select
5.2.6.

Printing/saving data

Data is printed out via the key
menu. The Options
is available in many different menus.
To assign the right function key with the
Assigning the right function key, page 36,
Only readings assigned a display field in the measurement view will
be saved / printed out.
The measurement data can be printed out parallel to the
saving process, while a measurement program is running.
To be able to transfer data to a record printer via infrared or
Bluetooth interface, the printer used must be enabled, see Printer,
page 40.
Graph charts can be printed out using the Bluetooth® /
IRDA printer 0554 0620.
5.2.7.

Saving data to the clipboard (temporary memory)

Using the clipboard, measurement results from various
measurement types can be combined to produce a common
record, which can then be printed out (see above). Data is saved to
the clipboard via the
If there is data in the clipboard, the status bar shows the symbol
If there is data in the clipboard and the
all data in the clipboard will be printed out.
> [Options]
clipboard is deleted.
5.2.8.

Confirming an error message

If an error occurs, an error message is shown on the display.
> Confirming an error message: [OK].
www.
→Ι: [▲], [▼] → [ABC→&$/].
→Ι: [▲], [▼] → [Ι←]
[▲], [▼] → [←] or [→].
← next → [▲], [▼] → [Next].
[ ]. Data is saved via the
menu is accessed via the left function key and
Save function or see
Options menu and the Clipboard
Print command is triggered,
→ Delete clipboard: Any data saved to the
Testo-Direct
5 First steps
or [→Ι].
Options
command.
.
31
1.888.610.7664
.com