Printing/Saving Data; Saving Data To The Clipboard (Temporary Memory); Confirming An Error Message - TESTO 320 Instruction Manual

5.2.6.
5.2.7.
5.2.8.
info@Testo-Direct.com
All manuals and user guides at all-guides.com
Options:
> Toggle between upper/lower case:
Ι← ABC→&$/
select
> Position the cursor in the text:
select Ι← ABC→&$/
> Delete character before or after the cursor:
select ← next →
3. Repeat steps 1 and 2 as required.
4. Save the entry: Select

Printing/saving data

Data is printed out via the key
menu. The Options menu is accessed via the left function key and
is available in many different menus.
To assign the right function key with the
Assigning the right function key, page 34,
Only readings assigned a display field in the measurement view will
be saved / printed out.
The measurement data can be printed out parallel to the
saving process, while a measurement program is running.
To be able to transfer data to a record printer via infrared or
Bluetooth interface, the printer used must be enabled, see
Instrument diagnosis, page 33.

Saving data to the clipboard (temporary memory)

Using the clipboard, measurement results from various
measurement types can be combined to produce a common
record, which can then be printed out (see above). Data is saved to
the clipboard via the Options
If there is data in the clipboard, the status bar shows the symbol
If there is data in the clipboard and the
all data in the clipboard will be printed out.

Confirming an error message

If an error occurs, an error message is shown on the display.
> Confirming an error message: [OK].
Errors that have occurred but have not yet been rectified are
indicated by a warning symbol (
Error messages that have not yet been cancelled can be displayed
in the Error diagnosis
www.
→Ι: [▲], [▼]
→Ι: [▲], [▼]
[▲], [▼] → [←] or [→].
← next → [▲],
[ ]. Data is saved via the
Save
menu and the
Print
) in the header.
menu, <dg_ref_source_inline>.
Testo-Direct
5 First steps
→ [ABC→&$/].
→ [Ι←] or [→Ι].
[▼] → [Next].
Options
function or see
Clipboard command.
command is triggered,
29
1.888.610.7664
.com
.