Table of Contents
Advertisement
Connect to Power
4.5. Connect to Power
CAUTION
Ensure that the power supply is turned off before connecting it to the
equipment.
IMPORTANT
Using the wrong type of power supply can damage the equipment. Ensure
that the power supply is connected properly and of the recommended
type.
IMPORTANT
Before you connect the Communicator to power, ensure that the
PROFIBUS address is set on the rotary switches. If the PROFIBUS address
is set when the Communicator is operating, you must power cycle the
Communicator for the new setting to take effect.
SP2980 Version 1.21
®
Anybus
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Page 17 of 32
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus Communicator ABC3000 and is the answer not in the manual?
Questions and answers