Using For Unbalanced Polyphase Output - NF DP420LS Instruction Manual

4.15

Using for Unbalanced Polyphase Output

For the polyphase system, you can set the phase voltage and the phase to be unbalanced. The phase
can be set to be unbalanced from 0.0 to 359.9 degrees for both L2 phase and L3 phase.
 Operation procedure
1. Press the [Osc] soft-key and select [6: Phase Mode]. The setting window for the phase mode
opens.
2. In the [Mode] item, select [1: Unbalance]. The mode is switched to the unbalanced mode.
DP420LS/DP480LS

4.15 Using for Unbalanced Polyphase Output

159