Using As Dc Power Supply - NF DP420LS Instruction Manual

4.16

Using as DC Power Supply

You can use this product as a DC power supply by switching from the AC/DC mode to the DC mode
or the ACDC mode. For the voltage setting range, see 11.6.
-------- Notes ------------------------------------------------------------------------------------------------------------
 The polyphase system cannot be used as a DC power supply. The DC mode cannot be used.
The DC voltage (DCV) of the ACDC mode also cannot be set.
 The signal sources that can be combined with the ACDC mode are INT, SYNC, EXT, and
ADD.
 The signal sources that can be combined with the DC mode are INT and VCA.
-----------------------------------------------------------------------------------------------------------------------------
 Operation Method
1. Enter the ACDC mode or the DC mode. Following two methods are available.
(a) Shortcut operation:
Every time you press the keys, the mode is switched to AC, ACDC, and DC in this order.
(b) Press the [Osc] soft-key and select [1:AC/DC]. From the opened menu, select [2: ACDC] or
[3: DC].
2. Set the output DC voltage in the [DCV] item.
DP420LS/DP480LS
+

4.16 Using as DC Power Supply

161