Entering Strings (Character String Entry Box); Table 3-5 Character String Entry List - NF DP420LS Instruction Manual

3.3.6 Entering Strings (Character String Entry Box)

Enter the name of the data when saving it to the internal memory or USB memory. In this case,
hover the cursor over the string (which will be highlighted) and press the ENTER key. This
operation opens a character string entry box shown in the screen below.
When you turn the jog or press the up or down arrow key in a character string entry box, the
character at the cursor (highlighted character) is changed in a way shown in Table 3-5. When you
press a key in the numeric keypad, the corresponding value or symbol is entered. To move the cursor
position, use the right or left arrow key. When you press the ENTER key, the edited string is
confirmed and the character string entry box is closed.
 Turning the jog in the counterclockwise direction
Pressing the down arrow key
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-------- Notes ------------------------------------------------------------------------------------------------------------
 The name of the data which will be saved in the internal memory or USB memory must be 20
characters long at a maximum.
-----------------------------------------------------------------------------------------------------------------------------
DP420LS/DP480LS

Table 3-5 Character String Entry List

3.3 Basic Key Operations
Turning the jog in the clockwise direction
Pressing the up arrow key 
0123456789!#$%&'()+,-.;=@[]^_`{}~
(Note)  indicates a space.
33