2. Select the [ACV] item and then enter a numeric value. For how to enter values, see 3.3.5.
Operation procedures for setting the line voltage
1. Press the [Osc] soft-key and select [5:Target Phs] [5:All Line]. Or perform the Shortcut
operation
area (see 5.1) is
2. Select the [ACV] item and then enter a numeric value. For how to enter values, see 3.3.5.
DP420LS/DP480LS
+
to switch to [All Line]. Check that the icon in the output display
(single-phase three-wire system)/
3.4 Using the Continuous Function
(three-phase system).
43