Sequence Control By Control I/O; Screen Overview - NF DP420LS Instruction Manual

2. In [PwOn Mode] item, select [2: Seq].
-------- Notes ------------------------------------------------------------------------------------------------------------
 To set so as to Continuous function is selected at power-on, select [1: Cont] in [PwOn Mode]
item.
-----------------------------------------------------------------------------------------------------------------------------

4.2.11 Sequence Control by CONTROL I/O

CONTROL I/O enables to start/stop/suspend/branch a sequence and to recall the memory. For
details, see 4.18.1.

4.2.12 Screen Overview

The Sequence function view is broadly separated into the Sequence Edit View and the Sequence
Control View. It is Sequence Edit View that is displayed when sequence icon is selected from the
root menu. After pushing [Compile] soft-key in Sequence Edit View, the screen transitions to the
Sequence Control View.
-------- Notes ------------------------------------------------------------------------------------------------------------
 You cannot transition to root menu by pushing the MENU key in the Sequence Control View.
To transition to the root menu, first move to the Sequence Edit View and then push the MENU
key.
-----------------------------------------------------------------------------------------------------------------------------
DP420LS/DP480LS
4.2 Using Sequence Function
91