Simulation Control By Control I/O; Screen Overview - NF DP420LS Instruction Manual

2. In [PwOn Mode] item, Select [3: Sim].
-------- Notes ------------------------------------------------------------------------------------------------------------
 To set so as to Continuous function is selected at power-on, select [1: Cont] in [PwOn Mode]
item.
-----------------------------------------------------------------------------------------------------------------------------

4.3.11 Simulation Control by CONTROL I/O

CONTROL I/O enables to start/stop a simulation and to recall the memory. For details, see 4.18.1.

4.3.12 Screen Overview

The Simulation function screen is broadly divided to the Simulation Edit View and the Simulation
Control View. The Simulation Edit View opens when you select the power fluctuation testing
(Simulation) icon from the root menu. After pushing [Compile] soft-key in Simulation Edit View,
the screen transitions to the Simulation Control View.
-------- Notes ------------------------------------------------------------------------------------------------------------
 You cannot transition to root menu by pushing the MENU key in the Simulation Control View.
To transition to the root menu, first move to the Simulation Edit View and then push the
MENU key.
-----------------------------------------------------------------------------------------------------------------------------
DP420LS/DP480LS
4.3 Using Power Fluctuation Testing (Simulation) Function
115