(b) When not connecting the load with the neutral line (three-phase three-wire connection):
Connect between the Lo terminals of each cabinet by a cable which is as short and thick as
possible (with a diameter equal to or more than that of the voltage line).
L1
CAUTION
The terminal which can be grounded is the Lo terminal of each cabinet. Do not ground the Hi
terminal (L1, L2, and L3 voltage lines).
4. Attach the resin-molded power input terminal cover so that the cable passes through the cutout
of the cover.
WARNING
Do not use this product when the resin-molded terminal cover is removed. Otherwise, an electric
shock might occur.
Use enough thick cables or attach some additional guards to prevent touching live conductive
parts after attaching the resin-molded terminal cover.
When no load is connected, attach the resin-molded terminal cover so that the cutout of the
cover comes on the upside.
DP420LS/DP480LS
L1
L2
L3
(Cabinet ground terminal)
(b)Three-phase three-wire connection
2.5 Output and System Cable Connection
L2
Load
L3
17