NF DP420LS Instruction Manual page 150

 Saving to a Basic Setting Memory (how to save the output-related settings in the
Continuous function)
1. Press the MEMORY key on the Continuous function screen or select [Memory] from the root
menu to move to the Memory View.
2. Select Setting Store.
3. For the [To] item, select the destination [1: System] (internal memory) or [2: USB] (USB
memory).
4. Specify the destination.
(a) For the internal memory, specify the destination memory number in the [Memory No.] item,
then press the [Store] soft-key.
DP420LS/DP480LS
4.8 Using Memory Function
131