Table of Contents
Advertisement
3.3
Basic Key Operations
3.3.1 Changing the Output Function
(Continuous/Sequence/Simulation)
To change the Continuous/Sequence/Simulation function, press the MENU key. This operation
displays the root menu shown in the screen below.
Five icons are available in the root menu. The cursor location is informed by the highlighted icon. The
description of the icon at the cursor location is displayed in the box located at the bottom of the screen.
Move the cursor to the function you want to select by using arrow keys or the jog. Each icon in
upper line represents the Continuous function, Sequence function, and Simulation function from the
left. When you press the ENTER key, the screen for the selected function is displayed. You cannot
change the function in the output on state. However, you can move to the Memory function screen
or System function screen.
DP420LS/DP480LS
3.3 Basic Key Operations
29
Advertisement
Table of Contents
