Operation procedure
1. Push [Limiter] soft-key to select 3: V/F Limiter (or push
window for the voltage/frequency setting range limit.
2. The screen for the effective value setting or the peak value setting opens depending on the
signal source setting/output waveform settings made here. Set the voltage setting range limiting
value in the [V] item (effective value setting) and [+Vop]/[ Vop] item (peak value setting).
Effective Value Setting
3. Close the window.
DP420LS/DP480LS
4.1 Using Limiter, Setting Limiter
+
Peak value setting
). Opens the setting
61