Table of Contents
Advertisement
6
Preparing for Installation
Unpack and Inspect
Before you begin installation, check your shipment so you know it arrived
complete and undamaged.
1. Check the shipping container for physical damage:
2. If you find damage, document it to help with a claim against your shipper.
3. Unpack your order and check the contents against the packing list to be
sure your order is complete.
4. If you discover a problem, call ETC Customer Service. See Contacting ETC
on page 5.
Obtaining ETC approval to energize the system
You need ETC approval to apply power to your dimming system. You can get
pre-approval for some installations during the purchase process, or pass a
wiring inspection by an authorized ETC representative after the system is
installed. Wiring errors in unauthorized installations may endanger operators
or cause system damage and failure.
Warning! Do not attempt to energize the system without proper
Caution
approval. Energizing the system without ETC approval may
result in serious injuries.
Energizing your system without ETC approval may result in
equipment damage that may void your warranty!
Electronic Theatre Controls, Inc.
Advertisement
Table of Contents
