Echoflex Installation Guide
Switch-mount Occupancy Sensor
Prepare for Installation
Dual Tech Switch-mount Occupancy Sensors ship with electronics, a decorator
style wall plate, and a termination kit. The sensor may be installed into an
industry standard back box (provided by others) or surface mounted back box
(sold separately and available from Echoflex).
Compliance
UL/cUL listed, complies with UL508A, UL916, and CSA C22.2 No. 14
•
CE compliant
•
For use with Echoflex dimming and relay products.
Environment
Ambient
For indoor, commercial controls use only. Indoor installation only. The sensor
operates in ambient temperatures of -10° C to 40° C, with a maximum of
90% non-condensing humidity.
Installation
Echoflex recommends paying special attention to the installation
environment:
When operating in PIR only modes, the sensor must have an
•
unobstructed view of the room. Do not mount behind or near tall
cabinets, shelves, hanging light fixtures, etc.
Do not install the sensor within eight feet from an HVAC airflow
•
duct/vent.
Install the sensor where it cannot easily sense movement in areas
•
outside of the intended space, such as hallways, glass partitions, or
adjacent rooms.
Note:
allow for better vacancy detection results. Reference
DIP Switches on page 5
Dual Tech Switch-mount Occupancy Sensor
In areas of increased noise activity, enabling PIR only mode may
.
Page 2 of 20
Rotary and
Echoflex Solutions, Inc.