Table of Contents
Advertisement
Sensor Delta Dimming Installation Guide
Appendix B: Sensor Delta configuration options
Delta component designations
Components used for Sensor Delta dimming systems are designed
specifically for use with delta input power. Delta components are identified by
an added "D" in their model numbers.
Delta component model numbers
Installation racks–
Input power designations
Sensor Delta racks operate using 3-phase delta input at either 120 or 230 volts.
Model numbers of racks configured for 230 volt operation begin with an "H.".
120 volt input power
Component
Installation racks
Control Electronic Modules CEMD-48
Delta dimmer modules
There are three types of dimmer modules available. All delta dimmer modules
can operate using either 120 or 230 volt delta power input.
Modules
D25D
D25AFD
D50AFD
Note: Amperage designation are maximums for each module type. Actual
dimmer circuit maximum load will be determined by the rating of the
associated branch circuit breaker in the Delta Rack Auxiliary Bay.
Advanced Features designations
Sensor Delta Dimming systems equipped with ETC's Advanced Features (AF)
dimmer circuit reporting capability require AF compatible installation racks and
dimmer modules. Advanced Features is available for both 120 and 230 volt
Delta systems. AF components have "AF" added to their model numbers.
Component
Installation racks
Note: All Sensor CEMs support Advanced Features reporting.
SR12D
Control Electronic – CEMD-48
SR24D
Modules
SR48D
Designation
SR12D
SR24D
SR48D
CEMD-96
Description
Dual density 25 amp dimmer module
Dual density 25 amp dimmer module with Advanced Features
Single density 50 amp dimmer module with Advanced Features
Designation
SR12AFD
SR24AFD
SR48AFD
Dimmer modules –
CEMD-96
230 volt input power
Component
Installation racks
Control Electronic Modules HCEMD-48
Component
Dimmer modules
D25D
D25AFD
D50AFD
Designation
HSR12D
HSR24D
HSR48D
HCEMD-96
Designation
D25AFD
D50AFD
33
Advertisement
Table of Contents
