Echoflex Installation Guide
Wall Switch Sensor
Prepare for Installation
To ensure optimal function, consider the installation environment and the
following guidelines:
For indoor use only. Operating temperature -10°C to 45°C (14°F to
•
113°F), 5%–92% relative humidity (non-condensing).
High density construction materials and large metal appliances or
•
fixtures in the space may disrupt wireless transmissions.
Install the sensor within range of linked receivers or controllers,
•
24 m (80 ft). Consider adding a repeater to extend reception range.
Avoid locating the sensor where it can easily sense movement
•
outside of the intended space, such as hallways or adjacent rooms.
The warnings and
•
apply to line-powered models.
Install within the standard height range for a switch: 90–150 cm
•
(3–5 ft) from the floor.
Supplies required to install (not provided):
Appropriately sized wire nuts
•
Small cable ties
•
Faceplate
•
Wall Switch Sensor
IMPORTANT SAFEGUARDS on the facing page
Page 2 of 12
Echoflex