ETC echoflex Elaho E-LS Installation Manual

Echoflex Installation Guide
Elaho Light Sensor
Overview
The Elaho Light Sensor provides light level measurement and lighting control
for the connected Elaho control system. The sensor measures lighting
conditions to maintain a programmed lighting output in both dimmed and
switched systems.
Light Sensor Head with Controller
Light Sensors are available in three models:
E-LS - Light Sensor head with controller
•
E-LSC - Light Sensor controller only
•
E-LSH - Light Sensor head only
•
Each controller supports up to two Light Sensor heads. One head may be
installed within the controller, or both may be installed remotely. When using
a pair of Light Sensor heads, both heads transmit their light readings to a
single Light Sensor controller. The controller averages the received light levels
and uses the average to control the lighting within the space.
Custom Configuration
This document guides you through the installation and local configuration of
the Elaho Light Sensor. For more detailed information about the custom
configuration options available for the Light Sensor using ElahoAccess, see
the ElahoAccess Mobile App integrated help system.
Note:
set DIP switch 2 to "On". See
M a in Offic e Squamish, BC, Canada Phone +1 778 733 0111
E ma il info@echoflexsolutions.com
© 2020 Echoflex Solutions, Inc. Trademark and patent
Echoflex intends this document to be provided in its entirety.
Product information and specifications subject to change.
8 1 8 6 M 2 1 7 0 Rev C Released 2020-05
To use the configuration settings applied using ElahoAccess,
We b echoflexsolutions.com
Light Sensor Head
DIP Switch Settings on page
info: echoflexsolutions.com/ip
Thread Extender
9.