Table of Contents
Advertisement
32.2
Authority Level, User #
• Address: See Table 16
• Default:
• User 1: 1 (Authority Level 1)
• User 2: 2 (Authority Level 2)
• User 3: 3 (Authority Level 3)
• Users 4-32: 0 (No Authority Level assigned)
• Selections:
• 0 = No Authority Level assigned (Disabled)
• 1 = Authority Level 1 assigned
• 2 = Authority Level 2 assigned
• 3 = Authority Level 3 assigned
• 4 = Authority Level 4 assigned
32.2.1
Parameter Description
This parameter assigns an authority level to each user. The Authority Level assigns functions to the user's PIN and RF keyfob.
See Section 45.0 RF Keyfobs on page 129 for a description of RF keyfobs and how to assign them to users.
Authority Level defaults consist of the following options:
• Authority Level 1 (Master): All options except for Option 5.
• Authority Level 2 (Unlimited): All options except for Option 5.
• Authority Level 3 (User): All options except for Options 5, 7, 8, and 10-14.
• Authority Level 4 (One-Time): All options except 7-15.
Authority
Level Options
1
All On arming
2
Perimeter Only arming
3
Partial On arming
4
Disarming the system
5
One-time disarm
6
Send Open/Close reports
7
Force Arm/Bypass
8
All Areas on/off
9
View Alarm Memory, System Test, View System Trouble, Remote Program, Walk Test, Reset Sensors,
View Zone Trouble
10
Set Time/Date, Change Skeds, Renew One-time PINs, Add/delte other PINs, Set Chime Tone/Zones,
Set Partial On Zones, Auto Call Forwarding Enable (digits to dial at All On)/Disable (digits to dial at
Disarm
11
Move to Area
12
Extend Auto On Time
13
Adjust Keypad Settings, Change/Reset Outputs, Turn Chime On/Off, Turn Auto-Forward On/Off
14
Change PINs
15
View Log
DS7240-UK Reference Guide
Table 17: Authority Level Configuration Functions
Copyright © 2003 Bosch Security Systems
Function(s)
P/N: 4998122677Cr1 Page 77
PART III: PANEL PROGRAMMING
Advertisement
Table of Contents
