Table of Contents
Advertisement
34.0 Help Function Keys and Duress Parameters
The parameters in this section configure the keypad's Help Function keys and the Duress function for all keypads and areas.
Each key has 16 characters of programmable text that is displayed when the key is activated (see below for key activation).
See Section 43.0 Text Entry Parameters on page 125 and Section 21.8.7 Programming Text Entry Parameters on page 29, for
information on System Text programming and Text Parameter entries.
To activate the function assigned to the Help Function Keys, press and hold (1 second at least) the following keypad
combinations:
• [1]+[3] keys
• [4]+[6] keys
• [7]+[9] keys
34.1
Area Options for Help Function Keys
• Address:
• [1]+[3] Keys: 0694
• [4]+[6] Keys: 0696
• [7]+[9] Keys: 0698
• Default: See table below
• Selections: 0-15
Keypad Help Function Keys Area Options
Disabled for all Areas
Keys work for Area 1
Keys work for Area 2
Keys work for Area 3
Keys work for Area 4
34.1.1
Parameter Description
Use this parameter to assign areas to the keypad Help Function Keys. The keys report as follows:
• [1]+[3] keys reports as Zone 100 for all Areas
• [4]+[6] keys reports as Zone 101 for all Areas
• [7]+[9] keys reports as Zone 102 for all Areas
DS7240-UK Reference Guide
0
• •
Copyright © 2003 Bosch Security Systems
Enter This Data Digit to Select Options
1
2
3
4
5
6
7
8
• •
• •
• •
• •
• • • •
• • • •
• • • • • • • •
• • • • • • • • • • • • • •
PART III: PANEL PROGRAMMING
9 10 11 12 13 14
15
• •
• •
• •
• •
• • • •
• •
• •
• • • • • •
• •
• •
P/N: 4998122677Cr1 Page 81
Advertisement
Table of Contents
