Table of Contents
Advertisement
31.4
User Tamper Lockout Time
• Address: 0382
• Default: 1 (1 minute)
• Selections: 0-15 (minutes)
31.4.1
Parameter Description
This parameter determines how long a keypad is locked out when a User Tamper event occurs (selections are in minutes).
31.5
Installer PIN
• Address: 0383-0389
• Default: 7890000
• Selections: 0-9 (keypad keys)
31.5.1
Parameter Description
Do not use digits 10-15 when creating the Installer PIN. Entering these digits makes the PIN unusable and locks the
installer out of the panel.
The Installer PIN length is the same as all other system PINs (see Section 31.1 PIN Length on page 72). The default Installer
PIN is 7890(000) depending on the PIN length.
The Installer PIN cannot disarm the system, but it can access all other functions.
The Installer PIN reports as User 0.
If the Installer PIN is left at its factory default, the panel generates a System Trouble event as set in the Date
Format and Enable PIN Trouble parameter (see page 44). Make sure to change the default value. This event is
Local Only and is stored in the history buffer.
The Date Format and Enable PIN Trouble feature is disabled by default.
Page 74 P/N: 4998122677Cr1
PART III: PANEL PROGRAMMING
Copyright © 2003 Bosch Security Systems
DS7240-UK Reference Guide
Advertisement
Table of Contents
