Table of Contents
Advertisement
42.0 Miscellaneous System Trouble Options
• Address: 1265
• Default: See table below
• Selections: 0-3
Miscellaneous System Trouble Options
No Options Selected
Enable AC Fail Trouble Tone
Enable Ground Fault Display & Trouble Tone
Reserved
Reserved
42.0.1
Parameter Options
• Enable AC Fail Trouble Tone: Use this parameter to enable or disable the AC Fail Trouble Tone. If enabled, all keypads
will emit the trouble tone when an AC Fail condition occurs. This tone must be silenced from each area.
• Enable Ground Fault Display & Trouble Tone: Use this parameter to enable or disable the Ground Fault display on the
LCD keypad and the accompanying trouble tone (both LCD and LED keypads). If enabled, all LCD keypads will display a
Ground Fault message and all keypads will emit a trouble tone when a Ground Fault condition occurs. The display and tone
must be cleared from each area.
If Ground Fault reports are disabled and the Ground Fault Display & Trouble Tone parameter is disabled, then
ground fault events will not be logged.
Page 124 P/N: 4998122677Cr1
PART III: PANEL PROGRAMMING
0
• •
Copyright © 2003 Bosch Security Systems
Enter This Data Digit to Select Options
1
2
3
4
5
6
7
8
• •
• •
• • • •
9 10 11 12 13 14 15
DS7240-UK Reference Guide
Advertisement
Table of Contents
