Table of Contents
Advertisement
40.2
Assign (Area or Output), Sked #
• Address: See Table 31
• Default: See Table 31
• Selections:
• 0 = No Area/Output Assigned (Sked disabled)
• 1 = Area 1 or Output 1
• 2 = Area 2 or Output 2
• 3 = Area 3 or Output 3
• 4 = Area 4 or Output 4
• 5 = Output 5
• 6 = Output 6
• 7 = Output 7
• 8 = Output 8
• 9 = Output 9
• 10 = Output 10
• 11 = Output 11
• 12 = Output 12
• 13 = Output 13
• 14 = Output 14
• 15 = Output 15
40.2.1
Parameter Description
Entering a zero (0) in this parameter disables the Sked.
If the Sked Type is Auto On or Auto Off, this parameter assigns an Area to the Sked.
If the Sked Type is Output On or Output Off, this parameter assigns a programmable output. How the programmable output
functions at Sked time is determined in Section 39.0 Outputs. See page 110.
The output assigned to the Sked in this parameter can be any output. The Sked overrides that function at Sked Time.
The Sked function is only available for Outputs 1 to 15.
40.3
Time, Sked #
• Address: See Table 31
• Default: See Table 31
• Selections: 0-9
40.3.1
Parameter Description
Enter the time of day that the Sked will occur. There are four digits in this entry, each one occupying an Address.
Enter the time in 24-hour format (HHMM) where Midnight is 2400, noon is 1200 and 12:01 am is 0001.
Entering 0000 disables the Sked.
Page 118 P/N: 4998122677Cr1
PART III: PANEL PROGRAMMING
Copyright © 2003 Bosch Security Systems
DS7240-UK Reference Guide
Advertisement
Table of Contents
