Middle Deck Pull-Out Roller Unit - Canon iPR C7010VP Series Installation Manual

Chapter 2
5) Remove the 2 bearings [1], and then remove the upper deck pull-out aux-
iliary roller [2].
- 4 E rings [3]
- 2 gears [4]
- 2 dowel pins [5]
[1]
[3]
[5]
[4]
[3]
F-2-415
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
CAUTION: Point to note when attaching
- Do not touch the 2 rubber rollers with bare hand.
- The distance from the roller end to the E ring slot differs between the front
and the rear sides.
Short
[1]

2.2.10 Middle Deck Pull-Out Roller Unit

2.2.10.1 Middle Deck Pull-out Roller Unit

imagePRESS C6010 / imagePRESS C7010VP / imag ePRESS C6010VP /
imagePRESS C7010VP FS / imageP RESS C7010VP PSU / imagePRESS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
2-100
[2]
[1]
[3]
[5]
[4]
[3]
[1]
Long
0026-5014
[1]
F-2-416
No. Name of part
[1] Middle deck pull-out auxiliary roller
1) Remove the lower vertical path unit.
Please r efer to " Lower Vertic al Pa th Unit " in "POD De ck A 1 Servic e
Manual."
2) Remove the middle deck pull-out roller unit [1].
- 1 dial [2] (disengage the claw)
- 1 sintered bushing [3]
- 5 screws [4]
[4]
[4]
[3]
[2]
F-2-417
CAUTION: Point to note when attaching
Be sure to fit to the coupling [1].
[1]
3) Remove the 2 bearings [1], and then remove the middle deck pull-out aux-
iliary roller [2].
- 4 E rings [3]
- 2 gears [4]
T-2-11
Qty.
1
[4]
[1]
[4]
[4]