Removing The Deck Pull-Out Roller - Canon Paper Deck-AF1 Service Manual

4
Parts Replacement and Cleaning Procedure > Periodic Parts Replacement, Consumable Parts, and Cleaning Parts > Removing the Deck Pull-out Roller

Removing the Deck Pull-out Roller

1) Remove the pickup unit. 2) Remove the harness from the harness holder.
(Refer to:4-21)
4) Remove E rings, gear, parallel pin, and bearing from the deck pull-
out roller shaft.
4 Parts Replacement and Cleaning Procedure > Periodic Parts Replacement, Consumable Parts, and Cleaning Parts > Removing the Deck Pull-out Roller
5) Remove the deck pull-out roller from the deck pickup unit.
F-4-55 F-4-55
3) Remove one screw and then remove the harness holder.
x1
F-4-53 F-4-53
6) Remove E rings, gear, parallel pin, and bearing from the deck pull-
out roller.
F-4-56 F-4-56
27
F-4-54 F-4-54
F-4-57 F-4-57
27