Canon iPR C7010VP Series Installation Manual page 74

3) Push the Waste Toner Connecting Pipe [1] in the direction of the arrow,
and fit the plate [2] into the boss [3].
4) Check that the gear [4] of the Waste Toner Buffer Unit and the gear [5]
are matched.
18) Remove the Waste Toner Buffer [1].
- 1 wire saddle [2]
- 1 Connector [3]
- 1 Edge Saddle [4]
- 5 Screws [5]
F-2-116
CAUTION: Points to Note At Installation
Be sure to fit the hook [1] in the hole [2] of the main station and perform
installation.
Chapter 2
[2]
[1]
2-29