Table of Contents
Advertisement
7) Remove the 3 screws [1].
8) Open the Main-Station Right Front Cover [1] and Left Front Cover [2].
[2]
9) R emove the 2 s tepped screws [1], shift the 3 le vers [2] and the lever
(small) [3] in the direction of the arrow in order. While holding the grip
[4], detach the process unit cover [5].
[5]
[4]
F-2-9
[1]
F-2-10
[2]
[3]
[4]
[1]
F-2-11
CAUTION: Points to Note When Attaching the Process Unit Cover
- Align the cut-off [1] at the both ends of the process unit cover to the pin
[2] at the host machine.
[1]
- After shifting the 3 levers [2] of the process unit cover [1] as indicated,
shift the lever (small) [3] as indicated while pushing the [A] area toward the
rear.
If shifting the lever (small) [3] while the cover [1] does not fit to the
machine, the pin [4] is not set correctly, causing an error.
[1]
[4]
10) Remove the screw [1].
[1]
F-2-12
Chapter 2
[2]
[2]
[A]
[3]
2-3
Advertisement
Table of Contents
